!OUTPUT_RES¶
Output item control of the result
!WRITE, RESULT must be specified
Parameter¶
N/A
2nd Line or later¶
The following parameter names can be specified.
| Parameter Names | Physical Values |
|---|---|
DISP |
Displacement (Default output) |
ROT |
Rotation (Only for 781,761 shell) |
REACTION |
Reaction force of nodes |
NSTRAIN |
Strain of nodes |
NSTRESS |
Stress of nodes (Default output) |
NMISES |
Mises stress of nodes (Default output) |
ESTRAIN |
Strain of elements |
ESTRESS |
Stress of elements |
EMISES |
Mises stress of elements |
ISTRAIN |
Strain of integration points |
ISTRESS |
Stress of integration points |
PL_ISTRAIN |
Plastic strain of integration points |
TH_NSTRAIN |
Thermal strain of nodes (Not included) |
TH_ESTRAIN |
Thermal strain of elements (Not included) |
TH_ISTRAIN |
Thermal strain of integration points (Not included) |
VEL |
Velocity |
ACC |
Acceleration |
TEMP |
Temperature |
PRINC_NSTRESS |
Nodal principal stress(Scalar value) |
PRINCV_NSTRESS |
Nodal principal stress(Vector value) |
PRINC_NSTRAIN |
Nodal principal strain(Scalar value) |
PRINCV_NSTRAIN |
Nodal principal strain(Vector value) |
PRINC_ESTRESS |
Elemental principal stress(Scalar value) |
PRINCV_ESTRESS |
Elemental principal stress(Vector value) |
PRINC_ESTRAIN |
Elemental principal strain(Scalar value) |
PRINCV_ESTRAIN |
Elemental principal strain(Vector value) |
SHELL_LAYER |
Output per layer of layered shell element |
SHELL_SURFACE |
Output of surface information of shell element |
CONTACT_NFORCE |
Contact normal force(Vector value) |
CONTACT_FRICTION |
Contact friction force(Vector value) |
CONTACT_RELVEL |
Contact relative displacement (Vector value / slave point only) |
CONTACT_STATE |
Contact state(Scalar value / -1, 0, 1 and 2 means free, undefined, stick and slip respectively) |
CONTACT_NTRACTION |
Contact normal traction(Vector value) |
CONTACT_FTRACTION |
Contact friction traction(Vector value) |
BEAM_NQM |
Axial force, shear force, and bending moment of beam element |
ELEMACT |
Element activation status (Scalar value): 1 for inactive elements, 0 for active elements |